Table of Contents
Advertisement
HP-AM456-9002A Rev 01
time
Displaying the System Date and Time
Log into the Memory Array.
1.
System
Navigate to the
2.
context system
System
At the
context prompt, type:
3.
show clock
The command displays information similar to the following:.
system> show clock
clock 2009-07-04T15:39:27
Where:
Displays the date and time in the format yyyy-mm-
clock
ddThh:mm:ss.
The T is a delineator between the date and the time.
Setting the System Date and Time
Log into the Memory Array.
1.
System
Navigate to the
2.
context system
System
At the
context prompt, type:
3.
set clock <yyyy-mm-dd>T<hh:mm:ss>
Where:
yyyy-mm-dd
T
hh:mm:ss
VMA-series Memory Array Installation and Service Guide
Displaying and Setting System Information
Displays how long the system has been operational
since the last power cycle or system reboot in year,
day, hour formats.
context level. At the root prompt, type:
context level. At the root prompt, type:
Sets the date in the format:
• yyyy - The 4-digit year.
• mm - The 2-digit month. Valid values are 01 to 12.
• dd - The 2-digit day. Valid values are 01 to 31.
The delineator between the date and the time.
Sets the time in the format:
• hh - The 2 digit hour. Valid values are 00 to 23.
• mm - The 2-digit minutes. Valid values are 00 to 59.
• ss - The 2-digit seconds. Valid values are 00 to 59.
85
Advertisement
Table of Contents
