Table of Contents
Advertisement
Chapter 8 - Windows Drivers
Installing the Violin Utilities
144
Select Add or Remove Programs.
3.
The Uninstall or Change a Program manager appears.
Double-click the Violin Memory Array Storport program in the list.
4.
The Violin Array Storport Uninstall dialog box appears.
To delete the driver, click the Yes button.
5.
The Violin Array Storport Uninstall dialog box appears. You must restart the
Windows host to complete the uninstall.
To restart the host, click the Yes button.
The third step in the installation of the Windows Storport driver and Violin
Utilities is to install the Violin Utilities package (
itself.
In a direct-attached configuration, the Violin Utilities are installed on the host
machine and may be used to view valuable information about the driver and the
performance of the Memory Array system.
The Violin Utilities package includes the following tools.
Table 8.1 Command Line Utilities for Displaying Windows Driver Information
Utility
perf_test
vcounts
veeprom
vinfo
vstat
vupdate_tz
VMA-series Memory Array Installation and Service Guide
driver-utils-Dx.x.x.zip
Description
A multi-threaded AIO-capable disk benchmark
utility.
Display Memory Array I/O counters.
Display main board serial number,
management MAC address, etc., information.
Display driver version and registry tunable
parameters.
Display Memory Array status information.
Synchronize time zone data from host to the
Memory Array for time correlation of
Memory Array system logged events. If this
command is not used, then
All times are GMT based.
Host time synch to the Memory Array will not
occur until 15 minutes after driver load time.
)
HP-AM456-9002A Rev 01
Advertisement
Table of Contents
