Table of Contents
Advertisement
Appendix D - CLI Reference
VIMM Context Commands
230
Figure D.5 Chassis>Board0>Slot >VIMM Context Commands
The table below describes the commands available at the VIMM context level of
the CLI. Specify the VIMM number when moving into the Slot context level. See
on page 223.
context slot
Table D.5 VIMM Context Commands
Command
set admin-state
show
set admin-state
Sets the administrative state of the VIMM. When you change the state to down,
you turn off power to the specific VIMM so it can be removed without electrical
damage to the VIMM, the slot in which it is located, or the main board. The LED
on the main board that is associated with the slot is then lit solid red to indicate
that the VIMM can be removed safely. The LED turns off when the VIMM is
removed.
Syntax
set admin-state {down | up}
Where:
Turns off power at the VIMM's slot.
down
Turns on power at the VIMM's slot and configures the VIMM
up
as a spare.
VMA-series Memory Array Installation and Service Guide
Description
Sets the administrative state of the VIMM.
Displays various VIMM information.
HP-AM456-9002A Rev 01
Advertisement
Table of Contents
