Chapter 5 - Operating the System via the CLI
Displaying and Setting Hardware Information
92
Display hardware information for the Memory Array, including:
•
Fan tray status
•
Which slots are populated with VIMMs
•
Individual VIMM information
•
Test slots
•
System LEDs
Displaying VIMM Configuration Information
Display the VIMM configuration information at the
To display the VIMM configuration information:
Log into the Memory Array.
1.
Navigate to the desired
2.
context chassis board 0 slot <
Where:
n
Specifies the VIMM slot number to move to. Valid values are in
the range of 0–83, inclusive.
At the context prompt, type:
3.
show vimm
This command displays text similar to the following:
chassis board 0 slot 56> show vimm
admin-state
oper-state
vimm-state
raid-group
vimm-type
mem-type
raw-capacity
raw-capacity-bytes
fmt-capacity
fmt-capacity-bytes
part-number
serial-number
mfg-date
fw-date
fw-version
VMA-series Memory Array Installation and Service Guide
Slot
context level. At the root prompt, type:
n
>
up
up
active
0
FLASH
SLC-NAND
68.7GB (64GiB)
68,719,476,736
45.1GB (42GiB)
45,097,156,608
1000159A-B-P4
18094R00000003
20090422
Thu Feb 11 17:54:00 2010
0x39df
Slot
context level.
HP-AM456-9002A Rev 01