HP-AM456-9002A Rev 01
The Windows system installs the drivers. A confirmation dialog box confirms
that the driver was correctly installed.
Reboot the host.
9.
Log into the host as
10.
The Found New Hardware window appears, The window verifies that the
Memory Array is properly connected to the host and is ready to be
configured.
Select the No, Not This Time option and proceed with the installation of the
11.
Windows device driver.
For step-by-step instructions, see
Verifying Host Computer Connections
After installing the Windows Storport driver and rebooting the system, log
1.
into the host as
administrator
The Found New Hardware window appears. The window verifies that the
Memory Array is properly connected to the host and is ready to be
configured.
Select the No, Not This Time option and proceed with the installation of the
2.
Windows device driver.
For step-by-step instructions, see
Removing the Windows Drivers
Log into the host as
1.
Open the Control Panel.
2.
VMA-series Memory Array Installation and Service Guide
.
administrator
Installing the Violin Utilities
.
Installing the Violin Utilities
.
administrator
Installing Windows Drivers
on page 144.
on page 144.
143