Table of Contents
Advertisement
HP-AM456-9002A Rev 01
To connect to the Memory Array from a Windows machine, see
Note:
in via a Windows host computer
To connect to the Memory Array from a Linux desktop:
Right-click on the desktop and select
1.
prompt in the terminal window, type:
telnet <ip_address>
Where:
ip_address
At the login prompt, type the user login name (default is admin).
2.
At the password prompt, type the user password (default is admin).
3.
The following is an example of what you will see after successfully
4.
connecting to the CLI.
VMA-series Memory Array Installation and Service Guide
on page 59.
Open Terminal
Specifies the IP address of the Memory Array.
Connecting to the CLI
Logging
. At the command
77
Advertisement
Table of Contents
