Table of Contents
Advertisement
HP-AM456-9002A Rev 01
during bootup because the data plane is not enabled until later in the process.
Such alarms may be safely ignored.
Understanding System Alarm and System
Message Commands
When hardware malfunctions or another error occurs on the Memory Array
system, you are notified in the following ways: the Alarm LED on the front of the
Memory Array chassis is lit (solidly or flashing) and a alarm is raised by the
system.
The names of active system alarms and system messages may be viewed by
running the
show system alarms
command on the Memory Array.
•
show system alarms
Memory Array.
•
show system messages
var/log/messages
The
show system alarms
may be run on either the Memory Array or a Syslog server on the host.
show system alarms command
The
show system alarms
Array.
The command may be run by entering
context level or, alternately, by entering
> show system alarms
alarm1 Data plane disabled
alarm2 Scheduler paused
alarm3 VIMM flash format in progress (2% complete)
alarm4 VIMM configuration OUT OF SPEC, 2 missing, 0 failed from 5
VIMM system
alarm5 CPL IRQs on VIMM 13: 0x00000c00
alarm6 CPL IRQs on VIMM 15: 0x00000c00
alarm7 CPL IRQs on VIMM 16: 0x00000400
The
show system alarms
on the Memory Array system. Instructions for clearing system alarms are
offered in this appendix.
VMA-series Memory Array Installation and Service Guide
Understanding Memory Array Alarms
command or the
command displays the current alarms on a
command displays the current contents of the
file.
command and
show system messages
command displays the current alarms on a Memory
show system alarms
at the Alarm context prompt.
show
command returns the name of every active alarm
show system messages
command
at the root
189
/
Advertisement
Table of Contents
