Table of Contents
Advertisement
Chapter 6 - Servicing the Array
114
Press firmly down on the latches until the VIMM disengages from the slot.
5.
Lift the VIMM out straight vertically to avoid shorting the pins and place in a
static bag.
Align the new VIMM with the empty slot, as shown in the following figure.
6.
VIMM
Figure 6.3 Inserting the Replacement VIMM
Firmly press the VIMM into the slot until the latches click close. After a
7.
short time interval, when the system software recognizes the new VIMM,
program the FPGA on the VIMM, and clear the alarm for that slot.
The red LED will turn off, indicating no existing alarms for that VIMM.
VMA-series Memory Array Installation and Service Guide
Latches
HP-AM456-9002A Rev 01
Advertisement
Table of Contents
