Table of Contents
Advertisement
General Commands
HP-AM456-9002A Rev 01
The table below describes the general commands available at any context level
of the CLI.
Table D.1 General Commands
Command
Cancels a scheduled reboot and CLI session.
cancel
Initializes or erases the indicated system resource.
clear
Moves to lower context level.
context
Exits the CLI.
exit
Formats flash capacity.
format
Displays this list of commands.
help
Retrieves the most recently typed user commands.
history
Sends an ICMP
ping
Reloads/restarts the indicated processor.
reboot
Resets the Ethernet Interface. See the
reset
Commands
Restores system configuration parameters.
restore
See
Save system configuration parameters.
save
See
Sets the specified Memory Array parameter.
set
Displays Memory Array parameters.
show
Shuts down the system.
shutdown
Returns to the top most command node of the CLI.
top
Moves up one node level in the CLI command tree.
up
Retrieves help on commands, arguments and subnodes.
?
cancel
Cancels or unschedules a scheduled reboot or the specified CLI session. To
cancel a CLI session you must first know the ID of the CLI session. Get this
information using the
show session
Syntax
cancel {cli | system} {session <session_id> | reboot}
VMA-series Memory Array Installation and Service Guide
Description
ECHO_REQUEST
on page 238.
on page 265.
restore config
on page 264.
save config
command.
General Commands
to another network host.
Ethernet 0 Context
213
Advertisement
Table of Contents
