Appendix D - CLI Reference
218
If you do not specify the time delay, you are prompted whether to reboot the
system immediately. Answer y to reboot immediately or n to cancel the
immediate reboot request.
See
Rebooting the Memory Array
reset
Resets the Ethernet interface. During a reset, active Telnet and SSH sessions
are terminated, which is useful if the session is hung.
Syntax
reset chassis controller ethernet 0
set
Runs the specified command parameters.
Syntax
set <parameter> [<value>]
Where:
parameter
value
show
Displays the results for the specified requested information.
Syntax
show [<parameter>]
VMA-series Memory Array Installation and Service Guide
on page 98 for more information.
The command parameter to run. The available
parameters are different at each context level.
The value to which the parameters should be set, if
required.
HP-AM456-9002A Rev 01