Conventions For Storage Capacity Values; Window Illustrations; Hp Technical Support; Subscription Service - HP StorageWorks XP24000 Configuration Manual

Conventions for storage capacity values

HP XP storage systems use the following values to calculate physical storage capacity values (hard
disk drives):
• 1 KB (kilobyte) = 1,000 bytes
• 1 MB (megabyte) = 1,000 2 bytes
• 1 GB (gigabyte) = 1,000 3 bytes
• 1 TB (terabyte) = 1,000 4 bytes
HP XP storage systems use the following values to calculate logical storage capacity values (logical
devices):
• 1 KB (kilobyte) = 1,024 bytes
• 1 MB (megabyte) = 1,024 2 bytes
• 1 GB (gigabyte) = 1,024 3 bytes
• 1 TB (terabyte) = 1,024 4 bytes
• 1 block = 512 bytes

Window illustrations

The windows shown in this guide were displayed on a Windows computer with the Internet Explorer
browser. The windows may appear different on your computer depending on the operating system
and browser being used. Window contents also vary depending on installed program products and
the storage system being managed.

HP technical support

For worldwide technical support information, see the HP support website:
http://www.hp.com/support
Before contacting HP, collect the following information:
• Product model names and numbers
• Technical support registration number (if applicable)
• Product serial numbers
• Error messages
• Operating system type and revision level
• Detailed questions

Subscription service

HP recommends that you register your product at the Subscriber's Choice for Business website:
http://www.hp.com/go/e-updates
After registering, you will receive e-mail notification of product enhancements, new driver versions,
firmware updates, and other product resources.
XP Disk Array Configuration Guide for VMware 9