Using Scp; Table 5.3 Downloading Methods And Example Paths - HP VMA Series Installation And Service Manual

Table 5.3 Downloading Methods and Example Paths

Using
FTP
<user>@ftp://<host_ip_addr>/<path>/<upgr_image>.upg
bob@ftp://10.10.0.15/pub/vtms-array-firmware-x8-A3.7.2-18919.upg
HTTP
http://<host_ip_addr>/<path>/<upgr_image>.upg
http://10.10.0.15/vtms-array-firmware-x8-A3.7.2-18919.upg
NFS
nfs://<host_ip_addr>/<path>/<upgr_image>.upg
nfs://10.10.0.15/vol/vol1/home/common/vtms-array-firmware-x8-
A3.7.2-18919.upg
SCP
<user>@scp://<host_ip_addr>/<path>/<upgr_image>.upg
You may be asked to establish the authenticity of the host when connecting. Type yes to
continue downloading the software image from the host to the Memory Array.
bob@scp://10.10.0.15/tftpboot/vtms-array-firmware-x8-A3.7.2-
18919.upg
SFTP
<user>@sftp://<host_ip_addr>/<path>/<upgr_image>.upg
You may be asked to establish the authenticity of the host when connecting. Type yes to
continue downloading the software image from the host to the Memory Array.
bob@sftp://10.10.0.15/tftpboot/vtms-array-firmware-x8-A3.7.2-
18919.upg
TFTP
tftp://<host_ip_addr>/<path>/<upgr_image>.upg
tftp://10.10.0.15/vtms-array-firmware-x8-A3.7.2-18919.upg
HP-AM456-9002A Rev 01
Specify the path to the upgrade image using one of the methods listed in the
following table.
Path Description
Use SCP to copy the upgrade image to a host server with SSH access
Note:
to your system, because it requires no server setup on the host server.

Using SCP

To upgrade the software on the Memory Array using SCP:
Copy the upgrade image provided by HP Customer Support onto the host
1.
server.
Log into the Memory Array.
2.
Download the upgrade software to the Memory Array. At the root context
3.
prompt, type:
set system sw-upgrade path <user>@scp://<host_ip_addr>/
<path>/<memory-array_upgr_image>.upg
Where:
user
VMA-series Memory Array Installation and Service Guide
Upgrading the System Software
Specifies the user login name for the host.
101