Table of Contents
Advertisement
Appendix D - CLI Reference
258
Table D.17 System Context Commands (Continued)
Command
save config
set admin
set boot-params
set clock
set clock-source
save config
restore config
set led-test
set name
show boot-params
show clock
show clock-source
show log
show messages
show name
show reboot
show status
cancel reboot
Cancels a currently scheduled reboot.
Syntax
cancel reboot
clear log
Clears the system log.
VMA-series Memory Array Installation and Service Guide
Description
Commits the admin login password and system
log service changes to the flash or reverts back
to the factory default settings. If the changes
are not committed before the system is
rebooted, then the changes are lost and the
previous settings are used.
Changes the password for the admin login.
Sets the systems boot parameters.
Sets the date/time in ISO-8601 format: yyyy-
mm-ddThh:mm:ss.
Sets the clock source for the system.
Saves system changes to the flash.
Reverts back to factory settings.
Initiates a functional test of the system's LEDs.
Sets the name of the Memory Array.
Displays the systems boot parameters.
Displays the system date and time.
Displays the current clock source for the
system.
Displays the log buffer.
Displays the /var/log/messages file.
Displays the name of the Memory Array.
Displays when the scheduled reboot will take
place.
Displays the status of various software
modules.
HP-AM456-9002A Rev 01
Advertisement
Table of Contents
