Appendix D - CLI Reference
216
Where:
Specifies the percentage of usable flash capacity. Valid
value
values are:
• 50
• 65
• 78
• 84
• 87
• 90 — Not recommended for high performance or high reliability
Default is 65%.
Higher usable percentages provide more usable capacity where needed. Lower
usable percentages increase system write performance, endurance, and
reliability. For advice on selecting a good usable percentage, consult with HP
Customer Support.
help
Lists the available general commands, or information on a specific command.
Syntax
help [
<command>
Where:
command
history
Displays the most recently used CLI commands.
Syntax
history
Example
To display the most recently issued CLI commands, type:
history
VMA-series Memory Array Installation and Service Guide
systems.
]
The specific command to get help information about.
HP-AM456-9002A Rev 01