Table of Contents
Advertisement
Appendix C - Alarm Reference
Service-Affecting Alarms
190
show system messages Command
The
show system messages
var/log/messages
The message log file created on the Memory Array contains system log and
typical boot up messages in addition to any set CLI commands that are run on
the system.
The command may be run by entering
context level or, alternately, by entering
prompt.
system> show messages
Jun 13 10:12:07 syslog: oam_clkd: OAM +1 sec. time correction
(src==host).
Jun 13 10:37:01 last message repeated 4 time(s)
Jun 13 10:37:01 login[93]: root login
Jun 13 10:37:01 oam_cli[93]: Opening session for userid 'admin'
Jun 13 10:44:12 syslog: oam_clkd: OAM +1 sec. time correction
(src==host).
Jun 13 10:56:31 last message repeated 2 time(s)
Jun 13 10:56:31 cpl_logd: [000027706] WARNING
ecpu_hwmgr_correlate_and_log_alarms(): ALARM-CLEAR: Scheduler
paused
Jun 13 10:56:31 cpl_logd: [000027706] WARNING
ecpu_hwmgr_correlate_and_log_alarms(): ALARM-CLEAR: System
booting
Jun 13 10:56:31 cpl_logd: [000027706] ERROR
ecpu_hwmgr_correlate_and_log_alarms(): ALARM-CLEAR: Data plane
unavailable
Jun 13 11:01:15 syslog: oam_clkd: OAM +1 sec. time correction
(src==host).
The
show system messages
alarm on the Memory Array system.
Service-affecting alarms are alarms raised by the system when an error occurs
which interrupts traffic and indicates that the data plane is either severely
impacted or completely disabled.
Unless noted otherwise, service-affecting alarms are indicated when the Alarm
LED flashes. The LED stops flashing when the alarm clears and the system
returns to a normal operational state.
This section is organized into eight topics:
VMA-series Memory Array Installation and Service Guide
command displays the current contents of the
file.
show system messages
show messages
command returns the name of every active
at the root
at the System context
on `ttyS0'
HP-AM456-9002A Rev 01
/
Advertisement
Table of Contents
