Table of Contents
Advertisement
HP-AM456-9002A Rev 01
The command displays information similar to the following:
system logging syslog> show service
service
Sending the System Log to a Host
Start or stop the service to send the system log messages to a host. By default,
it is off.
To set the status of the system log service:
Log into the Memory Array.
1.
Syslog
Navigate to the
2.
context system logging syslog
Syslog
At the
context prompt, type:
3.
set service {on | off}
Where:
Starts the service that sends the system log messages to the
on
syslog host.
Stops the service that sends the system log messages to the
off
syslog host.
To commit the change made, from the
4.
prompt, type:
save config
Syslog
Or, from the
top
save config
Or:
save system config
VMA-series Memory Array Installation and Service Guide
Displaying and Setting System Log (Syslog) Options
on
context level. At the root prompt, type:
System
context level, type:
context level command
73
Advertisement
Table of Contents
