Table of Contents
Advertisement
HP-AM456-9002A Rev 01
Where:
Displays the date and time in the format
clock
dd
and the time.
show clock-source
Displays the current clock source of a Memory Array. The source can be the
host of the system or local, which defines the clock source as the Memory Array.
Syntax
show clock-source
The command displays information similar to the following:.
system> show clock-source
clock-source
Where:
Indicates that the clock source is derived from the host
host
PC. This is the default value.
Indicates that the clock source is derived from the
local
Memory Array.
show log
Displays the current entries in the log buffer. The display of the log is controlled
by whether pagination has been enabled or not in the current CLI session. See
set pagination
on page 247 for more information.
Syntax
show log
VMA-series Memory Array Installation and Service Guide
. The T is a delineator between the date
T
hh:mm:ss
host
System Context Commands
yyyy-mm-
267
Advertisement
Table of Contents
