Uptime Context Commands
HP-AM456-9002A Rev 01
Figure D.25 System>Uptime Level
The table below describes the commands available at the Uptime context
sublevel of the CLI. Access the Uptime context sublevel through the System
context level.
Table D.28 Uptime Context Command
Command
Displays how long the Memory Array has been operational.
show
show
Displays how long the system has been operational. The time is displayed in
tenths of a second and in years, days, and hours.
Syntax
show
The command displays information similar to the following:.
system uptime> show
tenths-second
time
VMA-series Memory Array Installation and Service Guide
Description
19097058
0 years, 22 days, 02:28:25
Uptime Context Commands
297