LED-state Context Commands
HP-AM456-9002A Rev 01
Figure D.18 System>LED-State Context Level
The table below describes the commands available at the LED State context
sublevel of the CLI. Access the LED State context sublevel through the System
context level. See
System Context Commands
Table D.20 LED State Context Commands
Command
Displays the current status of the system LEDs.
show
show
Displays the current status of the system LEDs.
Syntax
show
Example
To display the current status of the system LEDs, at the LED State context
prompt, type:
show
VMA-series Memory Array Installation and Service Guide
LED-state Context Commands
on page 257.
Description
277