Environmental Specifications; Table 1-2: Environmental Specifications - Aerotech PRO165SLE Hardware Manual

Hardware Manual

1.1. Environmental Specifications

WARNING: General Hazard Warning! Do not expose this product to environments or
conditions outside of the listed specifications. You could damage the equipment if you
exceed the environmental or operating specifications.
DANGER: Risk in Explosive Atmosphere!
Standard Aerotech stage/motors are not rated for applications with explosive
l
atmospheres such as airborne dust or combustible vapors.
Do not operate stage/motors outside of Aerotech environmental specifications.
l
Table 1-2: Environmental Specifications
Ambient
Temperature
Humidity
Altitude
Vibration
Protection
Rating
Use
www.aerotech.com
Operating: 10° to 35° C (50° to 95° F)
The optimal operating temperature is 20° C ±2° C (68° F ±4° F). If at any time the
operating temperature deviates from 20° C degradation in performance could
occur.
Storage: 0° to 40° C (32° to 104° F) in original shipping packaging
Operating: 20% to 60% RH
Storage: 10% to 70% RH, non-condensing in original packaging.
The stage should be packaged with desiccant if it is to be stored for an extended
time.
Operating: 0 m to 2,000 m (0 ft to 6,562 ft) above sea level
Contact Aerotech if your specific application involves use above 2,000 m or below
sea level.
Use the system in a low vibration environment. Floor or acoustical vibration can
affect system performance. Contact Aerotech for information regarding your
specific application.
These stages have limited protection against dust, but not water. This equates to
an ingress protection rating of IP50.
Indoor use only
PRO165SL/SLE
17