Safety Procedures And Warnings - Aerotech Ensemble QL Hardware Manual

Ensemble QL Hardware Manual

Safety Procedures and Warnings

The following statements apply wherever the Warning or Danger symbol appears within this manual. Failure
to observe these precautions could result in serious injury to those individuals performing the procedures
and/or damage to the equipment.
W A R N I N G :
To minimize the possibility of electrical shock, bodily injury or death the following precautions
must be followed.
1. Operators must be trained before allowing them to operate the equipment.
2. All service and maintenance must be performed by qualified personnel.
3. Modification or use of this product in an unspecified manner may result in equipment
damage or bodily injury (shock or death).
4. The user must read this manual and related documentation thoroughly before operating the
equipment.
5. Cables can pose a tripping hazard. Securely mount and position all system cables to avoid
potential hazards.
6. This product must be mounted securely. Improper mounting can result in injury and
damage to the equipment.
D A N G E R :
This product contains potentially lethal voltages. To reduce the possibility of electrical shock,
bodily injury or death the following precautions must be followed.
1. Do not connect or disconnect any electrical components or connecting cables while
connected to a power source.
2. Disconnect electrical power before making any mechanical adjustments or performing
maintenance.
3. Do not remove the stage connection (J106) while the controller is engaged. Always remove
AC mains power before making a connection to the controller.
4. To avoid the risk of electric shock, do not touch the piezo stage while it is energized.
5. Make sure the system is properly grounded in accordance with local electrical safety
requirements.
6. Operator safeguarding requirements must be addressed during final integration of the
product.
www.aerotech.com
Declaration of Conformity
9