Checking The Configuration; Configuring The Transparent Firewall - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - SPU
l HTTP: 120 seconds
l ICMP: 20 seconds
l TCP: 600 seconds
l TCP-proxy: 10 seconds
l UDP: 40 seconds
l SIP: 1800 seconds
l SIP-media: 120 seconds
l RTSP: 60 seconds
l RTSP-media: 120 seconds
----End

2.9.3 Checking the Configuration

After the aging time of the firewall session table is set, you can view the aging time.
Procedure
l
----End
Example
Run the display firewall-nat session aging-time command, and you can view the aging time
of the firewall session table, for example:
<Quidway> display firewall-nat session aging-time
---------------------------------------------
tcp protocol timeout
tcp-proxy timeout
udp protocol timeout
icmp protocol timeout
dns protocol timeout
http protocol timeout
ftp protocol timeout
ftp-data protocol timeout
rtsp protocol timeout
rtsp-media protocol timeout
sip protocol timeout
sip-media protocol timeout
---------------------------------------------

2.10 Configuring the Transparent Firewall

A transparent firewall forwards packets to the destination VLAN at Layer 2 according to the
configuration of VLAN bridge instance, rather than routes.
Issue 01 (2011-07-15)
NOTE
In general, you do not need to change the aging time of a session table.
Run the display firewall-nat session aging-time command to view the aging time of the
firewall session table.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: 60 (s)
: 60 (s)
: 40 (s)
: 20 (s)
: 120 (s)
: 120 (s)
: 120 (s)
: 120 (s)
: 60 (s)
: 120 (s)
: 1800 (s)
: 120 (s)
2 Firewall Configuration
50