Huawei quidway s7700 Configuration Manual page 200

Quidway S7700 Smart Routing Switch
Configuration Guide - SPU
l
Data Preparation
To configure an access security policy, you need the following data.
No.
1
2
3
4
5
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
wlan
The WLAN view is displayed.
Step 3 Run:
security-profile { id profile-id | name profile-name }
An access security profile is configured.
After an access security profile is configured, its default settings are:
l Open system authentication and empty key if WEP is used
l 802.1x+PEAP authentication and TKIP encryption if WPA1 is used
l 802.1x+PEAP authentication and CCMP encryption if WPA2 is used
l WAI authentication and WPI encryption if WAPI is used
Step 4 Configure security policies.
l
Issue 01 (2011-07-15)
Connecting an AP to an AC correctly
WEP open system authentication
1. Run:
security-policy wep
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Data
Security profile name or security profile ID
WEP shared key and key ID
WPA/WPA2 shared key
l WAPI shared key if shared key authentication is used
l AC certificate file and private key file, certificate of the
AC certificate issuer, ASU certificate file name, and ASU
server's IP address if certificate authentication is used
(Optional) Interval for updating a base key (BK), BK
lifetime percentage, time-based interval or packet count-
based interval for updating an MBMS service key (MSK),
number of retransmissions of MSK negotiation packets, and
number of retransmissions of certificate authentication
packets
5 WLAN Configuration
*
189