Huawei quidway s7700 Configuration Manual page 178

Smart routing switch
Hide thumbs Also See for quidway s7700:
Table of Contents

Advertisement

Quidway S7700 Smart Routing Switch
Configuration Guide - SPU
l
l
l
Data Preparation
To configure the WLAN service, you need the following data.
No.
1
2
3
4
5
Configuring a WLAN-ESS Interface
When an AP receives 802.11 radio packets, it converts the packets into 802.3 Ethernet packets
and forwards them to an AC. The AC uses a WLAN-ESS interface to send the 802.3 Ethernet
packets to the WLAN service module. The WLAN-ESS interface is configured with parameters
such as the QoS profile, interface priority, and authentication mode.
Issue 01 (2011-07-15)
Configuring basic AC attributes according to
Connecting an AP to an AC correctly
Configuring the WLAN radio environment according to
Radio Environment
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5.1.3 Configuring Basic AC Attributes
Data
WLAN-ESS interface number, guest VLAN ID, restrict
VLAN ID, and QoS CAR name
Security profile name or ID and security parameters required
for the specified authentication mode:
l WEP shared key authentication: key value and key ID
l WPA/WPA2 shared key authentication: key value
l WAPI authentication: names of the AC certificate file,
AC certificate issuer's certificate file, and authentication
server unit (ASU) certificate, ASU IP address, and
optional parameters, including: base key (BK) update
interval or lifetime percentage, time-based interval or
packet count-based interval for updating an MBMS
service key (MSK), maximum number of
retransmissions of MSK negotiation packets, and
maximum number of retransmissions of certificate
authentication packets
Traffic profile name or ID and optional parameters including
the tunnel priority value, mappings from user priorities to
802.1p priorities, mapping from 802.1p priorities to user
priorities, and packet rate limit
Service set name or ID, name or ID of the security profile
bound to the service set, and name or ID of the traffic policy
bound to the service set
AP ID, radio ID, name or ID of the service set bound to the
radio, and (optional) WLAN index
5 WLAN Configuration
5.1.5 Configuring the WLAN
167

Advertisement

Table of Contents
loading

Table of Contents