Huawei quidway s7700 Configuration Manual page 363

Quidway S7700 Smart Routing Switch
Configuration Guide - SPU
Delete State
Used State
Enable State
TCP State
Master Backup State
Slave Backup State
Packet State
Step 9 Save the configuration.
# Log in to the MPU and run the following command in the user view to save the configuration:
<MPU> save
# Log in to the SPU and run the following command in the user view to save the configuration:
<S7700> save
----End
Configuration Files
l
Issue 01 (2011-07-15)
Configuration file of the MPU
#
vlan batch 1 10 to 11 13 18
#
interface vlanif 18
ip address 18.0.0.1 24
#
interface gigabitethernet 2/0/10
port link-type trunk
port trunk allow-pass vlan 18
undo port trunk allow-pass vlan 1
#
interface gigabitethernet 2/0/11
port link-type trunk
port trunk allow-pass vlan 11
undo port trunk allow-pass vlan 1
#
interface vlanif 10
ip address 10.0.0.9 24
#
interface eth-trunk0
port link-type trunk
port trunk allow-pass vlan 10 to 11
port trunk allow-pass vlan 13
undo port trunk allow-pass vlan 1
#
interface eth-trunk1
port link-type trunk
port trunk allow-pass vlan 10 to 11
port trunk allow-pass vlan 13
undo port trunk allow-pass vlan 1
#
interface xgigabitethernet3/0/0
eth-trunk 0
#
interface xgigabitethernet3/0/1
eth-trunk 0
#
interface xgigabitethernet5/0/0
eth-trunk 1
#
interface xgigabitethernet5/0/1
eth-trunk 1
#
ip route-static 11.0.0.9 255.0.0.0 vlanif10 10.0.0.1
#
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Dual-System HSB Configuration
: NO
: YES
: YES
: CONNECT
: START
: START
: INITIAL
352