Huawei quidway s7700 Configuration Manual page 308

Quidway S7700 Smart Routing Switch
Configuration Guide - SPU
about servera, serverb, serverc, and serverd on the SPU. You can view the packet statistics
about server instances serverc and serverd, indicating that user packets are switched to
servergroup2 after Server A of servergroup1 is faulty. The packets are load balanced between
Server C and Server D according to a ratio.
[SPU] display load-balance group name servergroup1 member name servera verbose
[SPU] display load-balance group name servergroup1 member name serverb verbose
[SPU] display load-balance group name servergroup2 member name serverc verbose
[SPU] display load-balance group name servergroup2 member name serverd verbose
# Recover the link between the SPU and Server A, simulate the internal network user at
10.10.10.2 to access the virtual IP address 20.20.20.2/24, and then view related information
about servera, serverb, serverc, and serverd on SPUA. You can view that packet statistics
about server instances servera and serverb increase, whereas packet statistics about server
instances serverc and serverd do not increase. That is, user packets are switched back to
servergroup1 after Server A of servergroup1 is recovered, and are load balanced between
Server A and Server B according to a ratio.
[SPU] display load-balance group name servergroup1 member name servera verbose
[SPU] display load-balance group name servergroup1 member name serverb verbose
[SPU] display load-balance group name servergroup2 member name serverc verbose
[SPU] display load-balance group name servergroup2 member name serverd verbose
----End
Configuration Files
l
Issue 01 (2011-07-15)
Configuration file of the SPU
#
sysname SPU
#
acl number 3000
rule 5 permit ip destination 20.20.20.0 0.0.0.255
#
nat address-group 2 100.100.100.2 100.100.100.200
#
interface Eth-Trunk0
#
interface Eth-Trunk0.2
control-vid 2 dot1q-termination
dot1q termination vid 2
ip address 100.100.100.201 255.255.255.0
#
interface Eth-Trunk0.12
control-vid 12 dot1q-termination
dot1q termination vid 12
ip address 10.10.10.1 255.255.255.0
service load-balance policy lbp1
arp broadcast enable
#
interface Eth-Trunk0.13
control-vid 13 dot1q-termination
dot1q termination vid 13
ip address 10.10.50.1 255.255.255.0
arp broadcast enable
service load-balance
#
interface Eth-Trunk0.14
control-vid 14 dot1q-termination
dot1q termination vid 14
ip address 10.10.20.1 255.255.255.0
arp broadcast enable
service load-balance
#
interface Eth-Trunk0.15
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
arp-response nat address-group
arp-response nat address-group
6 Load Balancing Configuration
2
2
297