Establishing The Configuration Task; Configuring A Service Type - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - SPU
inconsistent with the required type, you need to change the service type, and then restart the SPU
to make the change take effect.

1.2.1 Establishing the Configuration Task

This topic describes the pre-configuration task and data preparations for configuring a service
type.
Applicable Environment
When using the SPU, you need to select a service type. Currently, the SPU can process the
following services:
l
l
l
Pre-configuration Tasks
You have logged in to the SPU successfully.
Data Preparation
To configure a service type, you need the following data.
No.
1

1.2.2 Configuring a Service Type

The SPU can process four types of services to meet different service requirements.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
set service-type type
The service type of the SPU is configured.
After a service type is changed, the original service configurations do not take effect any more.
The configurations of the new service type take effect after the SPU is restarted.
----End
Issue 01 (2011-07-15)
Firewall
Load Balance
IPSec
Data
Number of the type of the service to be processed by the SPU
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SPU Pre-Configuration
3