Huawei quidway s7700 Configuration Manual page 194

Quidway S7700 Smart Routing Switch
Configuration Guide - SPU
[AC-wlan-view] radio-profile name radio-1
[AC-wlan-radio-prof-radio-1] wmm-profile name wmm-1
[AC-wlan-radio-prof-radio-1] quit
# Bind the radio profile radio-1 to radios of AP1 and AP2.
[AC-wlan-view] ap 0 radio 0
[AC-wlan-radio-0/0] radio-profile name radio-1
[AC-wlan-radio-0/0] quit
[AC-wlan-view] ap 1 radio 0
[AC-wlan-radio-1/0] radio-profile name radio-1
[AC-wlan-radio-1/0] quit
Step 6 Configure service sets for APs.
# Create a security profile.
Create a security profile security-1, and set the authentication mode to WEP open system
authentication and the encryption mode to no encryption.
[AC-wlan-view] security-profile name security-1 id 1
[AC-wlan-sec-prof-security-1] wep authentication-method open-system
[AC-wlan-sec-prof-security-1] security-policy wep
[AC-wlan-sec-prof-security-1] quit
# Configure a traffic profile to specify the QoS policy.
Create a traffic profile traffic-1 and use the default settings.
[AC-wlan-view] traffic-profile name traffic-1
[AC-wlan-traffic-prof-traffic-1] quit
# Create service sets for AP1 and AP2, and bind the traffic profile, security profile, and WLAN-
ESS service to the service sets.
[AC-wlan-view] service-set name huawei-1
[AC-wlan-service-set-huawei-1] ssid huawei-1
[AC-wlan-service-set-huawei-1] traffic-profile name traffic-1
[AC-wlan-service-set-huawei-1] security-profile name security-1
[AC-wlan-service-set-huawei-1] wlan-ess 0
[AC-wlan-service-set-huawei-1] service-vlan 101
[AC-wlan-service-set-huawei-1] forward-mode direct-forward
[AC-wlan-service-set-huawei-1] quit
[AC-wlan-view] service-set name huawei-2
[AC-wlan-service-set-huawei-2] ssid huawei-2
[AC-wlan-service-set-huawei-2] traffic-profile name traffic-1
[AC-wlan-service-set-huawei-2] security-profile name security-1
[AC-wlan-service-set-huawei-2] wlan-ess 1
[AC-wlan-service-set-huawei-2] service-vlan 102
[AC-wlan-service-set-huawei-2] forward-mode direct-forward
[AC-wlan-service-set-huawei-2] quit
Step 7 Configure VAPs for APs and deliver VAP parameters.
# Bind radios of AP1 and AP2 to service sets huawei-1 and huawei-2.
[AC-wlan-view] ap 0 radio 0
[AC-wlan-radio-0/0] service-set name huawei-1
[AC-wlan-radio-0/0] quit
[AC-wlan-view] ap 1 radio 0
[AC-wlan-radio-1/0] service-set name huawei-2
[AC-wlan-radio-1/0] quit
# Deliver VAP parameters to APs.
[AC-wlan-view] commit ap 0
[AC-wlan-view] commit ap 1
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 WLAN Configuration
183