Configuring An Acl - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - SPU
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
load-balance action action-name
A load balancing action profile is created and the load balancing action profile view is displayed.
Step 3 Run the following command as required.
l Run:
l Run:
l Run:
l Run:
By default, the action is forward.
----End

6.4.9 Configuring an ACL

This section describes how to configure an ACL to identify the traffic of various services.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
acl [
An ACL is created and the ACL view is displayed.
In server load balancing, the value of number ranges from 3000 to 3999. That is, advanced ACLs
are used.
A Layer 3 classifier can be bound to only one ACL. If the ACL is configured repeatedly, the
latest ACL takes effect.
By default, no ACL is created.
Step 3 (Optional) Run:
Issue 01 (2011-07-15)
drop
The action is set to drop.
forward
The action is set to forward.
group master-group-name [ backup backup-group-name ]
The action is set to load balance.
stickygroup stickygroup-name
The action is set to the sticky operation.
number ] [ match-order {
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
config | auto } ]
6 Load Balancing Configuration
260