Configuring The Sta Blacklist And Whitelist - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - SPU
Profile name
Profile ID
Authentication
Encryption
------------------------------------------------------------
Service-set ID
0
1
------------------------------------------------------------
WEP's configuration
Authentication
Encryption
Key 0
Key 1
Key 2
Key 3
Default key ID
------------------------------------------------------------
WPA's configuration
Authentication
Encryption
------------------------------------------------------------
WPA2's configuration
Authentication
Encryption
------------------------------------------------------------
WAPI's configuration
CA certificate filename
ASU certificate filename
AC certificate filename
AC private key filename
Authentication server IP
Authentication method
WAI timeout(s)
BK update interval(s)
BK lifetime threshold(%)
USK update interval(s)
USK update packet(k)
MSK update interval(s)
MSK update packet(k)
Cert auth retrans count
USK negotiate retrans count
MSK negotiate retrans count
USK update method
MSK update method
------------------------------------------------------------

5.2.4 Configuring the STA Blacklist and Whitelist

By configuring the STA blacklist and whitelist, you can control STA access.
Applicable Environment
To prevent some STAs from accessing a WLAN network, add them to the STA blacklist. To
allow some STAs to access a WLAN, add them to the STA whitelist.
Pre-configuration Tasks
Before configuring the STA blacklist and whitelist, complete the following tasks:
l
l
Issue 01 (2011-07-15)
Configuring basic AC attributes according to
Connecting an AP to an AC correctly
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: lw
: 0
: Share key
: WEP-40
SSID
l00129796_9300
l00129796_93002
: Share key
: WEP-40
: *****
: Empty
: Empty
: Empty
: 0
: WPA 802.1x + PEAP
: TKIP
: WPA2 802.1x + PEAP
: CCMP
: -
: -
: -
: -
: -
: WAPI PSK
: 60
: 43200
: 70
: 600
: 10
: 86400
: 10
: 3
: 3
: 3
: Time-based
: Time-based
5.1.3 Configuring Basic AC Attributes
5 WLAN Configuration
192