Huawei quidway s7700 Configuration Manual page 188

Quidway S7700 Smart Routing Switch
Configuration Guide - SPU
Context
Exercise caution when resetting an AP because services on the AP will be interrupted.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
wlan
The WLAN view is displayed.
Step 3 Run:
ap-reset { all | id ap-id }
An AP is reset.
----End
Upgrading APs
An AP needs to negotiate with an AC about the software version after the AP goes online or the
software version on the AC changes. If the software version on the AP is different from that on
the AC, the AP starts to upgrade the software.
Context
An AP supports the following upgrade modes:
l
l
Procedure
l
Issue 01 (2011-07-15)
CAUTION
AC mode: An AP downloads the upgrade version file from an AC.
FTP mode: After the FTP function is configured on an AC by using the ap-update ftp-
server command, an AP downloads the upgrade version file from the specified FTP server.
NOTE
l The AC or FTP upgrade mode must be pre-configured on the AC. The AC allows a maximum of 128
APs of the same type to load the upgrade version file simultaneously.
l If the FTP mode is used, ensure that the upgrade version file name matches the version number
required by APs. Otherwise, APs will restart repeatedly.
Configure the AC mode.
NOTE
When the AC mode is used, upload the AP upgrade version file to the AC using TFTP or FTP.
1. Run:
system-view
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 WLAN Configuration
177