Huawei quidway s7700 Configuration Manual page 189

Quidway S7700 Smart Routing Switch
Configuration Guide - SPU
l
----End
Follow-up Procedure
l
l
Locating APs
You can accurately locate APs by checking the neighbors of a specified radio.
Issue 01 (2011-07-15)
The system view is displayed.
2. Run:
wlan
The WLAN view is displayed.
3. Run:
ap-update mode { ftp-mode | ac-mode }
The AP upgrade mode is set to AC mode.
4. Run:
ap-update update-filename filename ap-type type-id
The AP upgrade version file is specified.
Configure the FTP mode.
1. Run:
system-view
The system view is displayed.
2. Run:
wlan
The WLAN view is displayed.
3. Run:
ap-update ftp-server server-ip-address [ ftp-username ftpusername | ftp-
password ftppassword ]
The FTP server's IP address, FTP user name, and password are configured.
NOTE
The AP upgrade version file must be stored in the FTP working directory on the FTP server.
4. Run:
ap-update mode { ftp-mode | ac-mode }
The AP upgrade mode is set to FTP mode.
5. Run:
ap-update update-filename filename ap-type type-id
The AP upgrade version file is specified.
Run the ap-update multi-load ap-type type-id command to upgrade APs of the specified
type online.
After the APs are upgraded, run the ap-update multi-reset ap-type type-id to reset the
APs.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
*
5 WLAN Configuration
178