Configuring A Load Balancing Policy - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - SPU
l If the SPU is required to respond to ping requests of users, ping request packets of users must
l If the ACL in the Layer 3 classifier for matching the destination address is set to any, the
By default, the SPU does not respond to ping requests of users.
Step 6 (Optional) Run:
parameter connection profile-name
A connection parameter profile is bound to the Layer 3 classifier.
A connection parameter profile can be bound to one or more Layer 3 classifiers.
By default, no connection parameter profile is bound to a Layer 3 classifier.
Step 7 (Optional) Run:
parameter http profile-name
An HTTP parameter profile is bound to the Layer 3 classifier.
An HTTP parameter profile can be bound to one or more Layer 3 classifiers.
By default, no HTTP parameter profile is bound to a Layer 3 classifier.
Step 8 (Optional) Run:
nat
An NAT address pool is bound to the Layer 3 classifier.
no-pat indicates that PAT is not performed. That is, only the IP address of packets is translated
through NAT. The port number, however, is not translated.
The NAT address pool takes effect only after it is bound to a Layer 3 classifier or a server
instance. If an NAT address pool is bound to a Layer 3 classifier and a server instance
simultaneously, the NAT address pool bound to the server instance takes effect.
When the forwarding mode of a server group is set to transparent transmission, the NAT function
does not take effect even if a Layer 3 classifier or a server instance is bound to the NAT address
pool.
By default, no NAT address pool is bound to a Layer 3 classifier.
----End

6.4.13 Configuring a Load Balancing Policy

This section describes how to create a load balancing policy, and bind the Layer 3 classifier to
the load balancing policy.
Procedure
Step 1 Run:
system-view
Issue 01 (2011-07-15)
CAUTION
match the ACL in the Layer 3 classifier.
SPU responds to any ping request of users. In this case, the ACL is invalid. Therefore, you
need to configure the ACL in a Layer 3 classifier with caution.
outbound address-group number [
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Load Balancing Configuration
no-pat ]
264