Huawei quidway s7700 Configuration Manual page 23

Quidway S7700 Smart Routing Switch
Configuration Guide - SPU
3.
4.
5.
6.
7.
8.
9.
----End
Configuring Layer 2 Flow Import on SPU If Interfaces Are Not Aggregated
This topic describes how to configure Layer 2 flow import on the SPU in non-aggregation mode.
Issue 01 (2011-07-15)
Exit from the VLAN view.
Run:
interface interface-type interface-number
The LPU interface (this interface forwards the traffic processed by the SPU to the LPU)
view is displayed.
Run:
port link-type { access | hybrid | trunk
The link type of the interface is configured.
Run the corresponding command according to the link type to add the interface to the
outbound VLAN:
l Run the port default vlan vlan-id command to configure the default VLAN to which
the Access interface is added.
l For the Hybrid interface:
– Run the port hybrid tagged vlan { vlan-id1 [ to vlan-id2] }&<1-10> command to
add the Hybrid interface to the VLAN in tagged mode.
– Run the port hybrid untagged vlan { vlan-id1 [ to vlan-id2 ] }&<1-10> command
to add the Hybrid interface to the VLAN in untagged mode.
l Run the port trunk allow-pass vlan { { vlan-id1 [ to vlan-id2 ] }&<1-10> | all }
command to configure the VLAN to which the Trunk interface is added.
Run:
quit
Exit from the interface view.
Run:
interface xgigabitethernet interface-number
The view of the virtual XGE interface on the S7700 is displayed.
Run the corresponding command according to the link type to add the interface to the
outbound VLAN:
l Run the port default vlan vlan-id command to configure the default VLAN to which
the Access interface is added.
l For the Hybrid interface:
– Run the port hybrid tagged vlan { vlan-id1 [ to vlan-id2] }&<1-10> command to
add the Hybrid interface to the VLAN in tagged mode.
– Run the port hybrid untagged vlan { vlan-id1 [ to vlan-id2 ] }&<1-10> command
to add the Hybrid interface to the VLAN in untagged mode.
l Run the port trunk allow-pass vlan { { vlan-id1 [ to vlan-id2 ] }&<1-10> | all command
to configure the VLAN to which the Trunk interface is added.
Run:
quit
Exit from the interface view.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SPU Pre-Configuration
12