Configuration Instructions - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - SPU

Configuration Instructions

In the firewall load balancing technology, firewalls function as servers. The configuration
procedure of firewall load balancing is similar to that of server load balancing, and the difference
is described in the following two tables. For details about the configuration procedure, see
Configuring Server Load Balancing.
l
l
Issue 01 (2011-07-15)
Level-1 load balancing device
No. Step
1 (Optional) Configure firewall
health detection.
2 Configure the firewalls.
3 Configure a firewall group.
4 (Optional) Configure session
stickiness.
5 Configure a Layer 7 classifier.
6 Configure a load balancing
action.
7 Configure an ACL.
8 (Optional) Configure a
connection parameter profile.
9 (Optional) Configure an HTTP
parameter profile.
10 Configure a Layer 3 classifier.
11 Configure a load balancing
policy.
12 Apply the load balancing policy.
13 Check the configuration.
Level-2 load balancing device
No. Step
1 (Optional) Configure an NAT
address pool.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Load Balancing Configuration
Reference
6.4.3 (Optional) Configuring Server
Health Detection (Only the ICMP probe is
supported)
6.4.4 Configuring a Server
6.4.5 Configuring a Server Group
(DMAC must be used as the forwarding
mode)
6.4.6 (Optional) Configuring Session
Stickiness
6.4.7 Configuring a Layer 7 Classifier
6.4.8 Configuring a Load Balancing
Action
6.4.9 Configuring an ACL
6.4.10 (Optional) Configuring a
Connection Parameter Profile
6.4.11 (Optional) Configuring an HTTP
Parameter Profile
6.4.12 Configuring a Layer 3 Classifier
6.4.13 Configuring a Load Balancing
Policy
6.4.14 Applying the Load Balancing
Policy
6.4.15 Checking the Configuration
Reference
6.4.2 (Optional) Configuring an NAT
Address Pool
269