Huawei quidway s7700 Configuration Manual page 206

Quidway S7700 Smart Routing Switch
Configuration Guide - SPU
Figure 5-6 User isolation networking
As shown in
communicate directly.
Pre-configuration Tasks
Before configuring user isolation, complete the following tasks:
l
l
Data Preparation
To configure user isolation, you need the following data.
No.
1
2
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
wlan
The WLAN view is displayed.
Issue 01 (2011-07-15)
Gateway
AP
Client2
Client3
Figure 5-6, after user isolation is configured, clients 1 through 4 cannot
Configuring basic AC attributes according to
Connecting an AP to an AC correctly
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Client1
5.1.3 Configuring Basic AC Attributes
Data
Service set profile name or service set ID
(Optional) WLAN-ESS interface number
5 WLAN Configuration
195