Configuration Examples - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - SPU
<Quidway> display service-set ssid l00129796_93002
Service-set List:
----------------------------------------------------------------------------
ID
1
----------------------------------------------------------------------------
Total: 1

5.2.6 Configuration Examples

Example for Configuring Security Policies
Networking Requirements
As shown in
for access users. Five WLANs are available for the users. The requirements are:
l
l
l
l
l
Figure 5-7 Networking diagram of security policy configurations
Issue 01 (2011-07-15)
Name
lw2
Figure 5-7, the Switch functions as an AC; AP1 and AP2 provide WLAN services
Open system authentication is used on the WLAN with the SSID huawei-1.
Shared key authentication and WEP-40 encryption are used on the WLAN with the SSID
huawei-2.
WPA1 authentication and TKIP encryption are used on the WLAN with the SSID huawei-3.
WPA2 authentication and CCMP encryption are used on the WLAN with the SSID
huawei-4.
WAPI authentication is used on the WLAN with the SSID huawei-5.
Service VLAN 101
AP1
STA1
STA2
Area
A
Service VLAN 102
AP2
STA3
STA4
STA5
Area B
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
XGE1/0/0 XGE0/0/1
GE2/0/0
GE2/0/2
GE2/0/1 Switch
5 WLAN Configuration
BRAS
AC
IP backbone
RADIUS server
197