Configuring Basic Ac Attributes - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - SPU

5.1.3 Configuring Basic AC Attributes

Before deploying WLAN services on an AC, configure basic attributes for the AC, including
the AC ID, carrier ID, country code, and source interface.
Applicable Environment
An AC manages APs, controls WLAN user access, and guarantees security. APs can
communicate with the AC only after the basic AC attributes are configured.
Data Preparation
To configure basic AC attributes, you need the following data.
No.
1
2
3
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
wlan ac-global ac id ac-id [ carrier id { cmcc | ctc | cuc | other } ]
The AC ID and carrier ID are configured.
To facilitate AC management, configure an AC ID and a carrier ID on each AC.
By default, the AC ID is 0, and the carrier ID is other.
Step 3 Run:
wlan ac-global carrier id { cmcc | ctc | cuc | other } [ ac id ac-id ]
The AC ID and carrier ID are configured.
The supported carrier IDs are cmcc (for China Mobile), ctc (for China Telecom), cuc (for China
Unicom), and other.
Step 4 Run:
wlan ac-global country-code country-code
The country code is configured.
Issue 01 (2011-07-15)
NOTE
If you configure a carrier ID in this step, skip
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Data
AC ID, carrier ID, and country code
(Optional) VLANIF interface number and network segment
in the address pool (when the AC functions as a DHCP
server)
Source interface number
Step 3.
5 WLAN Configuration
151