Huawei quidway s7700 Configuration Manual page 373

Quidway S7700 Smart Routing Switch
Configuration Guide - SPU
[S7700-B] display hot-standby configuration
------------------HOT-STANDBY CONFIGURATION--------------------
Local IP Address
Peer IP Address
Source port
Destination port
Vpn Instance name
Keep Alive Time
Fail Count
Delete State
Used State
Enable State
TCP State
Master Backup State
Slave Backup State
Packet State
Step 9 Save the configuration.
# Log in to the MPU and run the following command in the user view to save the configuration:
<MPU> save
# Log in to the SPU and run the following command in the user view to save the configuration:
<S7700> save
----End
Configuration Files
l
Issue 01 (2011-07-15)
Configuration file of MPU A and MPU B
#
vlan batch 1 10 to 11 13 18
#
interface eth-trunk0
port link-type trunk
port trunk allow-pass vlan 10 to 11
port trunk allow-pass vlan 13
undo port trunk allow-pass vlan 1
#
interface eth-trunk1
port link-type trunk
port trunk allow-pass vlan 10
undo port trunk allow-pass vlan 1
#
interface eth-trunk2
port link-type trunk
port trunk allow-pass vlan 11
undo port trunk allow-pass vlan 1
#
interface gigabitethernet2/0/10
eth-trunk 1
#
interface gigabitethernet2/0/11
eth-trunk 2
#
interface xgigabitethernet3/0/0
eth-trunk 0
#
interface xgigabitethernet3/0/1
eth-trunk 0
#
interface gigabitethernet2/0/13
port link-type trunk
port trunk allow-pass vlan 13
undo port trunk allow-pass vlan 1
#
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Dual-System HSB Configuration
: 13.0.0.3
: 13.0.0.2
: 4001
: 3001
: NULL
: 1
: 20
: NO
: YES
: YES
: CONNECT
: START
: START
: INITIAL
362