Huawei quidway s7700 Configuration Manual page 174

Quidway S7700 Smart Routing Switch
Configuration Guide - SPU
The default channel mode is auto. In this mode, channels are selected for radios using the radio
profile automatically based on the WLAN radio environment.
Step 8 Run:
wmm-profile { id profile-id | name profile-name }
A WMM profile is bound to the radio profile.
----End
Binding a Radio Profile to a Radio
After a radio profile is bound to a radio, parameters defined in the radio profile are applied to
the radio.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
wlan
The WLAN view is displayed.
Step 3 Run:
ap ap-id radio radio-id
The radio view is displayed.
Step 4 Run:
radio-profile { id profile-id | name profile-name }
A radio profile is bound to the radio.
----End
(Optional) Configuring AP Radio Resource Management
An AP manages radio resources by selecting channels for radios, adjusting the radio transmission
power, and calibrating radio parameters.
Context
A coverage dead zone is generated when an AP is removed or signals are blocked by an obstacle.
An AC periodically checks for dead zones. If the AC detects a dead zone, it calibrates radios to
eliminate the dead zone.
Procedure
Step 1 Run:
system-view
Issue 01 (2011-07-15)
NOTE
A radio profile can be applied to a radio only after a WMM profile is bound to the radio profile.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 WLAN Configuration
163