Servicing Memory Risers And Dimms; Memory Riser And Dimm Configuration - Oracle SPARC T7-2 Service Manual

Servicing Memory Risers and DIMMs

These topics explain how to remove and install memory risers and DIMMs in the server.
"Memory Riser and DIMM Configuration" on page 91
■
"Identifying DIMMs" on page 92
■
"Memory Riser and DIMM FRU Names" on page 93
■
"Add Memory to the Server" on page 95
■
"Replace a Faulty DIMM" on page 99
■
"Remove a Memory Riser" on page 100
■
"Remove a DIMM" on page 102
■
"Install a DIMM" on page 104
■
"Install a Memory Riser" on page 106
■
"Enable and Verify a DIMM" on page 108
■
"DIMM Configuration Errors" on page 111
■

Memory Riser and DIMM Configuration

The server includes eight memory risers, each containing four DIMM slots. Four memory risers
are associated with each CPU.
Either 16 or 32 DIMMs may be installed in the server.
The memory configuration rules for the server are as follows:
All eight memory risers must be installed in all configurations.
■
In half-populated configurations (16 DIMMs) DIMMs must be installed in all CH0 slots.
■
These slots have black ejector levers.
In fully-populated configurations (32 DIMMs), DIMMs must be installed in all slots (CH0
■
and CH1)
Servicing Memory Risers and DIMMs 91