Ethernet - Christie Mirage S+14K User Manual

TROUBLESHOOTING
5.3

Ethernet

5-4
Roadster / Mirage S+ User's Manual
Downloaded From projector-manual.com Christie Manuals
Make sure the Ethernet settings are valid for your site—all network devices should
have the same subnet mask and unique IP addresses. Make sure the projector is
connected to a network before you attempt to change its IP address, and always cycle
power (off-on) to implement the new IP address.
1. Make sure to save any address change, and re-boot to implement.
If you still have trouble establishing communications with a projector added to an
existing Ethernet network, the projector's IP address is likely in conflict with another
address already in use. Contact your network administrator.