Christie Mirage S+14K User Manual page 58

OPERATION
3-24
Roadster / Mirage S+ User's Manual
Downloaded From projector-manual.com Christie Manuals
to 1200 x 1050. When using SD or HD or a decoded video source at
, the default blanking of "0" defines an active input window of 720 x 483.
INPUT 4
BLANKING (TOP, BOTTOM, LEFT, and RIGHT):
Crop the image as desired so that unwanted
edges are removed from the display (changed
to black—see right). Blanking defines the
size of the Active Input Window, or area of
interest. Range of adjustment depends on the
source resolution and other factors. After
adjustment of blanking it may be necessary
to perform a source switch.
NOTE: Blanking a PIP image resembles
zoom (Figure 3.14). For example, left
Blanking zooms the right side of the PIP
image; Right Blanking zooms the left side.
There are no black bars.
Figure 3.14. Blanking of a PIP Image
By default, a Plug & Play
PLUG & DISPLAY (EDID):
(EDID) source outputs a signal according to the EDID
information provided by the projector. To override this
information and display in a different format (for
example, if your Plug & Play [EDID] device does not
support the projector's resolution and/or frequency),
select the desired Plug & Play (EDID) resolution from
the list.
Any daisy-chained projectors will also display
according to the chosen Plug & Play (EDID) format.
EDID = Extended Display Identification Data standard.
INPUT 3
Figure 3.13. Blanking of a Primary
Image
or