Installation Considerations - Christie Mirage S+14K User Manual

2.2 Installation
Considerations
Lifting, Hoisting, '
and Stacking
Downloaded From projector-manual.com Christie Manuals
•
• LENS OFFSET:
o If remote keypad: Press either Lens H
o If built-in keypad: Press
'
Step 8
Image Adjustments
Press or
Menu
.
Although this projector delivers a high brightness, quality output, final display
quality could be compromised if the projector is not properly installed. This
subsection discusses issues you should consider before proceeding with a final
installation. Even if you do not intend to use the projectors in a fixed and permanent
installation, the following information will help you to better understand what you
can do to enhance display performance
For any new installation, you will likely have to safely lift or hoist the projector into
place. Keep in mind the following guidelines for safety.
Lifting
All models include handles for convenient hand transport only, such as when a
projector is lifted from a shipping container to a table. Note the following:
◊
The handles are intended to support the weight of one projector only.
◊
The handles are intended to support a projector for a brief time only.
◊
The handles are not safety points, nor points from which to hoist or suspend
the projector.
Hoisting
Four integral rigging points on the top of the projector (Figure 2.5) and eight on the
bottom (Figure 2.6) enable either upright or inverted hoisting. For either orientation,
hoist an individual projector, or up to 3 projectors in a stack.
To move the image:
Lens V .
keys.
(remote) to access display parameters described in Section 3
WARNINGS
• The handles can't support more than 1 projector.
• Do not use handles for extended time periods.
• Do not use the handles as safety points, or as points
from which to suspend or hoist the projector.
INSTALLATION & SETUP
or
Lens
and use the arrow
Shift
Roadster / Mirage S+ User's Manual
Figure 2.4
2-3