Christie Mirage S+14K User Manual page 55

Downloaded From projector-manual.com Christie Manuals
Resize Presets
S elect a Resize Presets option
to quickly display an image in
its native resolution or to
automatically resize an image
to closely fill the projector's
native resolution of 1400 x
1050, or to optimize the width
or height of your display. Size,
Position and Blanking
parameters will automatically
adjust accordingly. Or, if Blanking is set first, which defines an Active Input Area,
Resize Preset scaling will occur in this region of interest only. Resizing options are
explained in detail below.
WHAT IS THE RESIZING DEFAULT?
image will utilize as much of the projector's display area (1400 x 1050) as possible
for the type of incoming source data. See Select "Default" below.
WHEN "CUSTOM" APPEARS:
in the Size and Position menu when any of the values for Size, Vertical Stretch, H-
Position, V-Position or Blanking do not correspond to those for a preset. It is not a
choice in the Resize Presets pull-down list.
• Select
for most sources (factory default). The image will be centered
"DEFAULT"
and displayed as large as possible depending on the type of source, as described
below:
A 5:4 graphic image will enlarge to fill the screen height, and be
centered between narrow black side bars.
A video image or 4:3 graphic image will enlarge to fill the screen width.
An HDTV (16:9) image will fill the width and be centered between
black bars on top and bottom.
• Select
to display the image in its native resolution, which may be
"NO RESIZING"
smaller than the projector's 1400 x 1050 resolution. For example, for a source with
a native resolution of 800 x 600, "No Resizing" will center a small image within a
black border—the black border areas are unused areas. See below.
By default when displaying a new source, your
The "Custom" re-size descriptor automatically appears
Roadster / Mirage S+ User's Manual
OPERATION
3-21