Christie Mirage S+14K User Manual page 17

Installation Type
Downloaded From projector-manual.com Christie Manuals
IF THE CENTER LINES ARE PARALLEL BUT MISALIGNED:
• If centerlines are out by the same amount from top
and bottom – use offsets (on top projector) to bring
the centerlines into alignment.
• If centerlines are parallel but
others are not, turn the front
stacking mount wheel to bring
the centerlines into alignment.
STEP 6 '
Align the edges of the grid
With center lines aligned, adjust zoom (top projector) to align the edges of its image
with the other image. Then adjust focus. When aligned, all lines from the combined
red/green grids will be yellow.
'
STEP 7 Secure all stacking wheels and leg nuts
Turn all (3) stacking wheels until they are firmly
secure against the rest of the stacking mount.
Secure both (2) rear leg nuts against the bottom of
the projector.
STEP 8 '
Repeat steps 1 to 7 for a third projector
'
Choose the installation type which suits your needs:
front or rear screen, floor mount or inverted mount.
•
Easy to set up
•
Can be moved or changed quickly
•
Easy to access
•
Does not take up audience space
•
Projector is unobtrusive
•
Projector cannot be accidentally moved
WARNING
Critical Safety Procedure.
Front Screen, Floor Mount Installation
ADVANTAGES
Front Screen, Inverted Mount (ceiling) Installation
ADVANTAGES
INSTALLATION & SETUP
Figure 2.16. Secure All
Hardware
CONSIDERATIONS
•
Shares floor space with audience
CONSIDERATIONS
•
Installation is more permanent
•
It is more difficult to access the projector
Roadster / Mirage S+ User's Manual
2-11