Christie Mirage S+14K User Manual page 43

Downloaded From projector-manual.com Christie Manuals
PIP
Press to enable and disable Picture-in-Picture. PIP enables you to display two
different images simultaneously – typically a smaller "secondary" image within a
large "primary" background. When a menu control or slidebar is present, press
toggle the current function to affect the other image.
NOTE: Disable PIP and Best Switching for Interlaced sources > 35 kHz.
Shutter
Shutter
Press and hold
Shutter
open with a single keystroke. Or press and release
(shutter on; closed) or
(useful if you are unsure of the present state). Alternatively, press
from the present on/off state. A closed shutter blanks the display (turns it to black).
Close the shutter to mute all display while maintaining access to projector functions.
Opening the shutter restores the image.
NOTES: 1) The status of the shutter is shown in the LCD display window at the rear
of the projector. 2) The shutter is open upon power-up.
Function Key
Func
IF WITHIN A MENU:
Using the
with the appropriate topic elsewhere in Section 3. For example, press
Channel Setup menu to enable deletion or copying of a channel.
IF WITHIN A PRESENTATION:
digit number to enable a specific color or colors in the
display (see right). For example,
display only red and green data,
all color data. Eliminating one or more colors can help
with certain diagnostics and setups, such as when
accurately overlaying one image on top of another when
stacking projectors.
DEFINING OTHER USES:
special user functions for keys 1 – 5 and 7 – 9 and others. For example,
programmed to trigger RTEs (Real Time Events) or to display custom menus. Refer
to the separate Christie Serial Communications publication.
Proj Projector
Proj
Press to access a specific projector within a group of projectors or to confirm if
the local projector is listening. The number in the "Enter Number" window indicates
which projector is currently listening to commands, and will match the projector
number that has been defined in the Menu Preferences menu.
The "Projector" checkbox (read-only) shows whether or not the projector physically
connected to a keypad is listening to commands from that keypad. A checkmark
means that connected projector is listening; if there is no checkmark, you are
communicating with a different projector.
briefly to toggle the internal mechanical shutter blade closed or
(shutter off; open) to guarantee the correct toggle
for special tasks within the menu system is noted
Func
Press Func followed by a 2-
6 4
Func
6 7
Func will display
Through ASCII messaging on a PC, you can also create
Roadster / Mirage S+ User's Manual
OPERATION
Shutter followed immediately by
Shutter Shutter
Func
will
to
to toggle
in the
can be
Func
3-9