Using The Keypads - Christie Mirage S+14K User Manual

OPERATION
3.3 Using the
Keypads
3-4
Roadster / Mirage S+ User's Manual
Downloaded From projector-manual.com Christie Manuals
Keypads / Sensors
WIRED REMOTE KEYPAD CONNECTOR -
the projector.
BUILT-IN KEYPAD -
INFRARED SENSORS -
projector receive infrared signals from the IR keypad for remote control of
projector functions. For proper operation, make sure that these sensors are not
blocked.
The projector is typically controlled by using one of the following keypads:
•
•
While each of the keypads provides complete control of the projector, they differ
slightly in their arrangement of keys and in which functions can be accessed directly
with a key press rather than requiring use of the menu system. You may find one
keypad more convenient than another for your specific installation and application.
'
To control the projector
Built-in
when signals from a
remote keypad cannot
reach the projector, use
the projector's built-in
keypad (Figure 3.2). Two
nearby status windows
provide feedback
indicating current status and activities of the projector. Because the built-in keypad
has fewer keys than the remote keypad, certain projector functions are accessible
only through the menu system rather than via a direct key.
Alternative location for working with the projector.
The infrared (IR) sensors on the front and rear of the
Built-in Keypad at the rear of the projection head
Remote Keypad for tethered or tetherless control (includes cable for
connecting as a wired remote)
Figure 3.2. Built-in Keypad at Projector Rear
For optional tethered remote control of