Connection And Use; Connecting To A Computer Or Server With 10/100/1000 Base-T Ethernet - Christie 4K35-RGB Technical Reference

Hide thumbs Also See for 4K35-RGB:
Table of Contents

Advertisement

Europe, Middle East, and Africa: +44 (0) 1189 778111 or Support.EMEA@christiedigital.com
Asia Pacific (support.apac@christiedigital.com):
Australia: +61 (0)7 3624 4888 or tech-Australia@christiedigital.com
China: +86 10 6561 0240 or tech-supportChina@christiedigital.com
India: +91 (80) 6708 9999 or tech-India@christiedigital.com
Japan: 81-3-3599-7481
Singapore: +65 6877-8737 or tech-Singapore@christiedigital.com
South Korea: +82 2 702 1601 or tech-Korea@christiedigital.com
Christie Professional Services: +1-800-550-3061 or NOC@christiedigital.com

Connection and use

Once you have connected your computer to either the RS232 IN port (depending on which standard is
supported by your computer) or to the Ethernet port on Christie TruLife+, you can remotely access
controls and image setups, issue commands or queries, and receive replies.
Use these bidirectional messages to:
Control multiple projectors
Obtain a projector's status report
Diagnose performance problems
Refer to the User Manual provided with the projector for all cable requirements and other connection
details.
Some commands are operational only when projector is powered up.
Connecting to a computer or server with 10/100/1000 base-T
Ethernet
Communicate with a remote computer, server, or an existing network using a RJ-45 cable.
The port located on the Video Input panel uses the Christie proprietary protocol or Art-Net control
protocol and is intended for Christie accessories or automation controllers only.
1. Use an RJ-45 cable to connect the Ethernet hub or switch to the Ethernet port, located on the
projector Video Input panel.
2. When using the Christie serial protocol over Ethernet, connect to port 3002.
3. For applications or equipment using serial communications, use the Christie proprietary serial
protocol or Art-Net protocol to communicate with the Ethernet port on the Video Input panel.
Christie TruLife+ Technical Reference–Serial Commands
020-103316-07 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Communicating with Christie TruLife+
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Trulife+

Table of Contents