Christie Mirage S+14K User Manual page 36

Hide thumbs Also See for Mirage S+14K:
Table of Contents

Advertisement

OPERATION
3-2
Roadster / Mirage S+ User's Manual
Downloaded From projector-manual.com Christie Manuals
Focus
Operated with the keypad, focus adjusts the sharpness of the image at the current
throw distance.
Lens Offset
Operated with the keypad, vertical and horizontal offsets shift the lens and move the
image up or down and left or right. See Section 2, Installation and Setup and Section
6, Specifications for ranges and other details.
Shutter and Iris
Operated with the keypad, closing the internal shutter blocks the lens internally and
turns the image to off (black). Enlarge the diameter of the iris—a.k.a. optical
aperture—for optimized brightness; reduce the diameter to optimize contrast ratio.
Eyebolts
2 eyebolts on bottom (factory-installed)—for attaching safety cables when hoisting
inverted projectors.
4 eyebolts for top (separate)—for non-inverted hoisting. NOTE: 2 additional
safety eyebolts required.
Handles
For brief hand transport only. Not used for hoisting, rigging, or as safety points.
Stacking Mounts / Stacking Legs
NOTE: Optional on Mirage S
For stacking up to 3 projectors. See Section 2 for details.
Use Christie stacking mounts only.
Adjustable Feet
Turn the 4 adjustable feet to increase or decrease height and/or tilt as needed. For
most installations the projector will likely be slightly inclined to match the screen tilt
– this reduces the amount of vertical offset required. See 2.3, Projector Position and
Mounting
Filter Door
Louvered grille for air intake. Remove to access and replace air filter.
Lamp Door
Louvered/grille for accessing and replacing the lamp module. NOTE: Lamp
replacement requires a qualified service technician.
Input Panel
The input panel wires the projector to inputs (sources) and controllers such as PCs.
COMPOSITE/S-VIDEO INPUT -
signal from devices such as VCRs.
RGB INPUT -
Accepts RGB and sync signals from devices such as computers,
as well as composite video, S-Video or YPbPr component signals.
+
.
WARNING
Accepts a composite video, DVI and S-Video

Advertisement

Table of Contents
loading

This manual is also suitable for:

Roadster s+16kRoadster s+12sRoadster s+12k

Table of Contents